Aeotec Nano switch

SKU: ZW139-C
Brand:
Unit: pcs
Qty: Tellimisel (täpsustage tarne aega info@indome.ee)
Price:
63,50 €
Qty.: - +
   - or -   
With the AEOTEC Nano Switch all switchable and non-dimmable electric installations (e.g. lighting, sockets...) can be integrated into a Z-Wave network. Thus, the connected load can be switched both wirelessly via Z-Wave and locally via existing wall switch.
 
 
The compact radio module (60% smaller than its predecessor Micro Smart Switch) is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the AEOTEC insert that is controlling the load. The switch only sends control signal to the insert which controls the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.
 
Features:
  • Flush-mounted radio module
  • Maximum load: 2,300 W
  • Integrates existing installations (lighting, sockets...) into a Z-Wave network
  • Works with momentary or toggle switches 
  • Voltage: 230V, 50Hz
  • Wiring: Neutral conductor required
  • Power Consumption: < 0,8 W
  • Wireless Technology: Z-Wave Plus
  • Dimensions:  42,5x40x20 mm

 

Similar products
New edition of Fibaro Roller Shutter, featuring a unique functionality of a garage gate controller and power metering function. Designed to work with any VAC powered electric motor equipped with either electronic or mechanic limit switches.
SKU: FGRM-223 ,   Qty: 17
59,99 €
FIBARO RGBW Controller is a universal, Z-Wave compatible RGB/RGBW controller. FIBARO RGBW Controller uses PWM output signal, allowing it to control LED, RGB, RGBW strips, halogen lights and fans. Controlled devices may be powered by 12 or 24 VDC.
SKU: FGRGBWM-442 ,   Qty: 32
59,99 €
Product information "MCO Home Glass Touch Switch GEN5 (1 Button)"
The TPS411 GEN 5 by MCO Home is a wall switch with integrated switch relay and scene control. The relay can be controlled both with the touch switch, which is integrated into the glass surface, and via Z-Wave commands. The relay can switch a load with up to 1,100 watts. Beside local switching the device can be used to control two groups of directly associated devices. A blue LED on every button indicates the switching status.

The wall switch can be easily connected to an electrical load without installing a flush mounted module separately. The relay is located inside a module which is directly connected to the glass touch button. With that MCO Home wall switch you can replace any switch insert or toggle switch. The wall switch can be mounted on any flush box.

With the stylish glass wall switches by MCO Home you can easily integrate your already installed lights into your home automation network. Without installing any new cables, you can switch your lighting as usual via wall switch – but thanks to Z-Wave technology also via remote control, smartphone or sensor-controlled automation. With the new function of the scene control now you are able to start your configured scenes with only one touch.
SKU: MH-S411 ,   Qty: Tellimisel (täpsustage tarne aega info@indome.ee)
89,91 €
SKU: 4512554 ,   Qty: 5
119,90 €
SKU: FG-WDSEU221-AS-8001 ,   Qty: Tellimisel (täpsustage tarne aega info@indome.ee)
59,00 €