Heatit Z-Push Button 8

SKU: 4512581
Brand:
Qty: 1
Price:
54,00 €

Parameters


* Color

Qty.: - +
   - or -   
Heatit Z-Push Button 8 is a battery operated wall switch with 8 push buttons. The switch enables you to control the Z-Wave-products in your smart home system. Managing your Z-Wave products becomes easy and practical. The switch can be set up to control scenarios or work in associations with other Z-Wave products.


Heatit Z-Push Button 8 can control up to 4 seperate association groups with up to 20 products or up to 16 scenarios through your gateway.

Heatit Z-Push Button 8 may not be used as a stand-alone unit; it must be included in a gateway to function.

The switch fits into standard Elko, Schneider Exxact and Gira System 55 frames.

The switch is easy to installed, and may be fastened with screws or double-sided tape.

FUNCTIONS

  • Battery operated wall switch
  • Fits Gira System 55, Elko RS-16 and Schneider Exxact
  • Controls 4 separate groups and up to 20 units
  • Controls up to 16 scenarios via your gateway
  • LED-diode
  • Easy to install with screws or double-sided tape
  • Supports encryption modes S0, S2 Authenticated Class,
    S2 Unauthenticated Class

TECHNICAL DATA

Protocol Z-Wave, 868,4 MHz
SDK 6.71.01
Power 1 x CR2450 battery
Buttons 8
Operating temperature 0 – 40°C
Relative humidity 8% – 80%
Range Up to 20 meters (depending on surroundings)
IP class IP 20
Size (LxWxH) 71,2 x 71,2 x 13,6 mm
Explorer Frame Support Yes
Device Type Wall controller
Generic Device Class Switch Remote
Specific Device Class Switch Remote Multilevel
Routing No
Flirs No
Approvals CE, RoHS 2011/65/EU

 
Similar products
SKU: AS-24RB+ ,   Qty: Tellimisel (täpsustage tarne aega info@indome.ee)
From 46,80 €
Product information "MCO Home Glass Touch Switch GEN5 (1 Button)"
The TPS411 GEN 5 by MCO Home is a wall switch with integrated switch relay and scene control. The relay can be controlled both with the touch switch, which is integrated into the glass surface, and via Z-Wave commands. The relay can switch a load with up to 1,100 watts. Beside local switching the device can be used to control two groups of directly associated devices. A blue LED on every button indicates the switching status.

The wall switch can be easily connected to an electrical load without installing a flush mounted module separately. The relay is located inside a module which is directly connected to the glass touch button. With that MCO Home wall switch you can replace any switch insert or toggle switch. The wall switch can be mounted on any flush box.

With the stylish glass wall switches by MCO Home you can easily integrate your already installed lights into your home automation network. Without installing any new cables, you can switch your lighting as usual via wall switch – but thanks to Z-Wave technology also via remote control, smartphone or sensor-controlled automation. With the new function of the scene control now you are able to start your configured scenes with only one touch.
SKU: MH-S411 ,   Qty: Tellimisel (täpsustage tarne aega info@indome.ee)
89,91 €
SKU: FGWDEU-111-10 ,   Qty: Tellimisel (täpsustage tarne aega info@indome.ee)
689,00 €
SKU: FG-WDEU111-AS-8001 ,   Qty: Tellimisel (täpsustage tarne aega info@indome.ee)
59,00 €
SKU: FG-Wx-AS-4003 ,   Qty: 1
4,95 €