Heatit Z-Water 10 relay output module

SKU: 4512475
Brand:
Unit: set
Qty: 4
Price:
249,90 €
Qty.: - +
   - or -   
The module can be power supplied from a 230V AC mains connection, and is able to deliver an output supply of 24V DC. Heatit Z-Water relay outputs are able to be freely controlled from the Z-Wave network, and can be used for several purposes, e.g. on/off c

VÕIMALUSED

  • Releeväljundeid võib kasutada erinevate seadmete juhtimiseks. Näiteks põrandakütteajamid.
  • Võimalik kasutada nii 230V kui 24V põrandakütteajameid.
  • Sisendisse võimalik ühendada 4 analoogtemperatuuriandurit 10Kohm
  • Võimalik kasutada koos Heatit Z-Temp termostaadiga, et luua erinevaid autonoomseid küttetsoone.
  • DIN liistu kinnitus
  • Töötab ka Z-Wave pikendajana.
  • Tarkvarauuendamine üle õhu (OTA)
  • Erinevad tarkvaraversioonid (analoog/digitaal sisendid)
  • Toetab krüpteeringut: S0, S2 Access Control Class, S2 Authenticated Class, S2 Unauthenticated Class
 TEHNILISED ANDMED:

Protokoll: Z-Wave PLUS 
SDK 6.71.00
Tööpinge 100V – 240V 50/60Hz
Voolutarve 0.6W standby
Sisseehitatud kaitse 3.15A Quick-Acting, UMF 250 Schurter Inc., part no.: 3405.0171.11
24V DC väljund Max 1.17A, 28W
Releeväljundid Maksimaalne koormus: 5A
Maks. lülituspinge: 250V AC, 30V DC
Maks. lülitusvõimsus: 5A
Maks. koormustaluvus 1,250 VA, 150W

Sisendid
Maks. sisendpinge: 10V DC

Temperatuuriandurid: 10 KΩ
Sisendpinge: 5V DC
Z-Wave Plus Jah
Vastab nõuetele: CE, EN 50491-3: 2009, EN 60669-2: 2004, EMC 2014/30/EU, RoHS 2011/65/EU, LVD 2014/35/EU

Similar products
Heatit Extra floor sensor for Z-Water or Heatit thermostat.
SKU: 5430109 ,   Qty: Tellimisel (täpsustage tarne aega info@indome.ee)
9,00 €
Product information "MCO Home - External Sensor for MCOEMH7H-EH2"
The external Sensor for the electrical floor heating thermostats from MCO needs to be directly connected to the thermostat. The sensor is only used for overheating protection purpose.

For the overheating protection the sensor is located near the floor to overwatch the temperature of the floor. The temperature data of the external sensor will not be shown on the display nor transmitted over Z-Wave. The valuesof the external sensor are only used for internal process of the overheat protection function.
SKU: MCO_900090 ,   Qty: Tellimisel (täpsustage tarne aega info@indome.ee)
6,99 €
All your controls in one app
Install Blastbot in your room and control all your electronic devices at anywhere using your smartphone.
SKU: BCD01 ,   Qty: 8
89,90 €
The MCOEMH8-FC4 thermostat is a device for room temperature control, equipped with Z-Wave wireless technology. It is destined for central control of a 4-pipe fan coil, which influences room climate by heating, cooling, humidify and dehumidify. The device can read room temperature and local time, and automatically control fan speed based on the temperature difference.

The wall thermostat MCOEMH8-FC4 requires a static installation with mains power. Thanks to its modern design with capacitive glass touch panel it is particularly suited for visible installation in living areas.

With the modern designed glass touch thermostats by MCO you can control various heating and cooling systems – e.g. heating cable, heating film, water valve, electrical valve, boiler, fan coil, solar energy controller, heat pump, ventilation system etc,
SKU: MH8-FC ,   Qty: Tellimisel (täpsustage tarne aega info@indome.ee)
106,00 €
Heatit Z-TRM3 is an electronic thermostat for electrical floor heating, designed to be mounted in a standard flush box. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems. Heatit Z-TRM3 is equipped with a single-pole switch and fits into System 55 frames. The thermostat can withstand a load of max 16A /3600W at 230V. The thermostat may be used for water based heating if the thermostat is linked to the Heatit Z-Water.
SKU: 5430599 ,   Qty: 9
142,80 €