Heatit Z-TRM3 is an electronic thermostat for electrical floor heating, designed to be mounted in a standard flush box. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems. Heatit Z-TRM3 is equipped with a single-pole switch and fits into System 55 frames. The thermostat can withstand a load of max 16A /3600W at 230V. The thermostat may be used for water based heating if the thermostat is linked to the Heatit Z-Water.

All your controls in one app
Install Blastbot in your room and control all your electronic devices at anywhere using your smartphone.

FIBARO The Heat Controller (Z-Wave) is a remotely controlled thermostatic head to control temperature in your room. It measures the temperature and automatically adjusts the heat level. It can be mounted without tools on three types of thermostatic radiator valves. With additional FIBARO Temperature Sensor it is even more precise in adjusting the right temperature in your home. Temperature sensor can be placed anywhere in the room and the device will use it as a reference point for the room temperature. These devices together are a perfect match and let you create schedules via app to easily manage temperature throughout the week. Set of two devices: The Heat Controller FGT-001, Temperature Sensor FGBRS-001.

FIBARO The Heat Controller (Z-Wave) is a remotely controlled thermostatic head to control temperature in your room. It measures the temperature and automatically adjusts the heat level. It can be mounted without tools on three types of thermostatic radiator valves. With additional FIBARO Temperature Sensor it is even more precise in adjusting the right temperature in your home. Temperature sensor can be placed anywhere in the room and the device will use it as a reference point for the room temperature. These devices together are a perfect match and let you create schedules via app to easily manage temperature throughout the week. Set of two devices: The Heat Controller FGT-001, Temperature Sensor FGBRS-001.

Description: wireless temperature sensor which can be used with FIBARO Radiator Thermostat to provide best temperature regulation. One head can be paired with only one sensor, but one sensor can be paired with three heads.

Heatit Extra floor sensor for Z-Water or Heatit thermostat.

External room sensor, glass front NTC 10 k?

The module can be power supplied from a 230V AC mains connection, and is able to deliver an output supply of 24V DC. Heatit Z-Water relay outputs are able to be freely controlled from the Z-Wave network, and can be used for several purposes, e.g. on/off c

The MCOEMH8-FC4 thermostat is a device for room temperature control, equipped with Z-Wave wireless technology. It is destined for central control of a 4-pipe fan coil, which influences room climate by heating, cooling, humidify and dehumidify. The device can read room temperature and local time, and automatically control fan speed based on the temperature difference.

The wall thermostat MCOEMH8-FC4 requires a static installation with mains power. Thanks to its modern design with capacitive glass touch panel it is particularly suited for visible installation in living areas.

With the modern designed glass touch thermostats by MCO you can control various heating and cooling systems – e.g. heating cable, heating film, water valve, electrical valve, boiler, fan coil, solar energy controller, heat pump, ventilation system etc,

MCOHome Water / Electrical Heating Thermostat is a Z-Wave enabled device for indoor temperature control. MH7-WH-EU is mainly applied to control wall mounted boiler, water
valve/pump etc. , while MH7-EH-EU for electrical heating system. The device is of high reliability and practicability. And can be included and operated in any Z-Wave network with other Z-Wave certified devices from any other manufacturers.

Product information "MCO Home - External Sensor for MCOEMH7H-EH2"
The external Sensor for the electrical floor heating thermostats from MCO needs to be directly connected to the thermostat. The sensor is only used for overheating protection purpose.

For the overheating protection the sensor is located near the floor to overwatch the temperature of the floor. The temperature data of the external sensor will not be shown on the display nor transmitted over Z-Wave. The valuesof the external sensor are only used for internal process of the overheat protection function.

The MCOEMH8-FC4 thermostat is a device for room temperature control, equipped with Z-Wave wireless technology. It is destined for central control of a 4-pipe fan coil, which influences room climate by heating, cooling, humidify and dehumidify. The device can read room temperature and local time, and automatically control fan speed based on the temperature difference.

The wall thermostat MCOEMH8-FC4 requires a static installation with mains power. Thanks to its modern design with capacitive glass touch panel it is particularly suited for visible installation in living areas.

With the modern designed glass touch thermostats by MCO you can control various heating and cooling systems – e.g. heating cable, heating film, water valve, electrical valve, boiler, fan coil, solar energy controller, heat pump, ventilation system etc,

IN THE BOX
1 Netatmo Smart Radiators Valves